for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - h i gh i p3 - s mt 10 10 - 1 HMC665LP4 / 665lp4e gaas mmic mixer w/ integrated if & lo amplifier, 0.7 - 1.2 ghz v00.0508 general description features functional diagram the HMC665LP4 e is a highly integrated converter i c that operates from 0.7 to 1.2 ghz for both up-conversion and downconversion applications. the HMC665LP4 e incorporates a high dynamic range, passive double- balanced mixer core with integrated lo and i f amplifers, making it ideal for compact transceiver applications in g s m, wcdma, td- s cdma, wibro and wima x . this versatile converter r f i c operates with a low lo input power level of only -3 dbm, provides up to 10 db conversion gain, and exhibits +23 dbm i nput i p3 in downconversion mode. this r f i c provides up to 11 db conversion gain in upconverter mode. s pecifc evaluation boards are available for both upconverter and downconverter modes. high i nput i p3: +23 dbm low i nput lo drive: -3 to +6 dbm high lo to r f i solation: 36 db high conversion gain: 10 db i deal for upconversion or downconversion 24 lead 4x4mm s mt package: 16mm 2 electrical specifcations, t a = +25 c, lo = 0 dbm, vcclo= vddif = +5v typical applications the HMC665LP4 / HMC665LP4 e is ideal for: ? cellular/3g & wima x /lt e /4g i nfrastructure ? base s tations & r epeaters ? broadband & fixed wireless ? access points ? test & measurement e quipment parameter min. typ. max. units frequency r ange, r f, lo 0.7 - 1.2 ghz frequency r ange, i f 250 - 450 mhz conversion gain 7 10 db noise figure ( ss b) 10 db lo to r f i solation 32 36 db lo to i f i solation 1 db i p3 ( i nput) 23 dbm 1 db compression ( i nput) 10 dbm lo drive i nput level (typical) -3 to +6 dbm s upply current ( i dd i f + i cclo) 150 200 ma *unless otherwise noted, all measurements performed as a downconverter and confgured as shown in the downconverter mode application circuit, if=250 mhz
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - h i gh i p3 - s mt 10 10 - 2 conversion gain vs. lo drive, if = 250 mhz input ip2 vs. lo drive, if = 450 mhz input ip2 vs. temperature, if = 450 mhz HMC665LP4 / 665lp4e v00.0508 gaas mmic mixer w/ integrated if & lo amplifier, 0.7 - 1.2 ghz downconversion plots conversion gain vs. lo drive, if = 450 mhz conversion gain vs. temperature, if = 250 mhz conversion gain vs. temperature, if = 450 mhz -15 -10 -5 0 5 10 15 500 700 900 1100 1300 1500 lo= -3 dbm lo= 0 dbm lo= 3 dbm lo= 6 dbm conversion gain (db) frequency (mhz) -15 -10 -5 0 5 10 15 500 700 900 1100 1300 1500 lo= -3 dbm lo= 0 dbm lo= 3 dbm lo= 6 dbm conversion gain (db) frequency (mhz) -20 -15 -10 -5 0 5 10 15 20 500 700 900 1100 1300 1500 +25c +85c -40c conversion gain (db) frequency (mhz) -20 -15 -10 -5 0 5 10 15 20 500 700 900 1100 1300 1500 +25c +85c -40c conversion gain (db) frequency (mhz) 30 40 50 60 70 80 90 500 700 900 1100 1300 -3 dbm 0 dbm +3 dbm +6 dbm ip2 (dbm) rf frequency (mhz) 30 40 50 60 70 80 90 500 700 900 1100 1300 +25c +85c -40c ip2 (dbm) rf frequency (mhz)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - h i gh i p3 - s mt 10 10 - 3 HMC665LP4 / 665lp4e v00.0508 gaas mmic mixer w/ integrated if & lo amplifier, 0.7 - 1.2 ghz downconversion plots input p1db vs. temperature, if = 350 mhz input ip3 vs. lo drive, if = 450 mhz input ip3 vs. temperature, if = 450 mhz upconversion plots conversion gain vs. lo drive, if = 250 mhz conversion gain vs. lo drive, if = 450 mhz 0 5 10 15 20 25 30 500 700 900 1100 1300 -3 dbm 0 dbm +3 dbm +6 dbm ip3 (dbm) rf frequency (mhz) 0 5 10 15 20 25 30 500 700 900 1100 1300 +25c +85c -40c ip3 (dbm) rf frequency (mhz) -15 -10 -5 0 5 10 15 650 825 1000 1175 1350 lo= -3 dbm lo= 0 dbm lo= 3 dbm lo= 6 dbm conversion gain (db) frequency (mhz) -15 -10 -5 0 5 10 15 650 825 1000 1175 1350 lo= -3 dbm lo= 0 dbm lo= 3 dbm lo= 6 dbm conversion gain (db) frequency (mhz) 4 7 10 13 16 500 700 900 1100 1300 +25c +85c -40c p1db (dbm) rf frequency (mhz) isolation vs. frequency -40 -30 -20 -10 0 10 500 700 900 1100 1300 1500 1700 rf to if lo to rf lo to if isolation (db) frequency (mhz)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - h i gh i p3 - s mt 10 10 - 4 input ip2 vs. lo drive, if = 450 mhz input ip3 vs. lo drive, if = 450 mhz 30 40 50 60 70 80 90 650 800 950 1100 1250 lo = -3 dbm lo = 0 dbm lo = 3 dbm lo = 6 dbm ip2 (dbm) rf frequency (mhz) -15 -10 -5 0 5 10 15 20 650 800 950 1100 1250 -3 dbm 0 dbm +3 dbm +6 dbm ip3 (dbm) rf frequency (mhz) HMC665LP4 / 665lp4e v00.0508 gaas mmic mixer w/ integrated if & lo amplifier, 0.7 - 1.2 ghz if bandwidth return loss -35 -30 -25 -20 -15 -10 -5 0 5 10 200 300 400 500 600 conversion gain return loss response (db) if frequency (mhz) -30 -25 -20 -15 -10 -5 0 0 0.5 1 1.5 2 2.5 3 rf lo return loss (db) frequency (mhz) harmonics of lo mxn spurious @ if port nlo s pur at r f port lo freq. (ghz) 1 2 3 4 0.5 31 32 32 39 0.6 28 23 32 47 0.7 30 21 30 44 0.8 37 21 32 47 0.9 38 23 37 53 1.0 35 24 40 43 1.2 34 27 33 55 1.4 35 32 33 58 1.6 36 38 46 62.6 lo = 0 dbm values in dbc below input lo level measured at r f port. nlo m r f 0 1 2 3 4 0 xx 3 21 29 58 1 7 0 33 52 59 2 66 56 50 65 84 3 91 84 73 77 91 4 91 91 91 91 91 all values in dbc below i f power level (1 r f - 1lo) typical supply current vdd i f + vcclo i dd i f + i cclo +4.5 130 ma +5.0 150 ma +5.5 165 ma absolute maximum ratings r f / m ix i f i nput (vdd i f = +5v) +22 dbm lo i nput (vcclo = +5v) +10 dbm i f i n +15 dbm vcclo +7 vdc vdd i f +8 vdc junction temperature 150 c continuous pdiss (t = 85 c) (derate 14.9 mw/ c above 85 c) 0.97 w thermal r esistance (junction to ground paddle) 67.2 c/w s torage temperature -65 to +150 c operating temperature -40 to +85 c
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - h i gh i p3 - s mt 10 10 - 5 e l e ct ro s tat ic se n si t i v e de v ic e ob ser v e handl i ng p re caut i on s outline drawing not es : 1. l e adf r am e mat eri al: copp er alloy 2. d i m e n si on s a re i n i nch es [m i ll i m e t ers ] 3. l e ad s pac i ng tol er anc e is non-cumulat i v e . 4. pad bu rr l e ngth s hall b e 0.15mm ma xi mum. pad bu rr h ei ght s hall b e 0.05mm ma xi mum. 5. packag e wa r p s hall not ex c ee d 0.05mm. 6. all g r ound l e ad s and g r ound paddl e mu s t b e s old ere d to pcb r f g r ound. 7. re f er to h i tt i t e appl i cat i on not e fo r s ugg es t e d land patt er n. HMC665LP4 / 665lp4e v00.0508 gaas mmic mixer w/ integrated if & lo amplifier, 0.7 - 1.2 ghz typical performance cascade analysis HMC665LP4e downconverter mode (rf input = 700 to 1200 mhz, if output = 250 to 450 mhz, lo = low side or high side) component level cumulative mcm performance description gain (db) nf (db) o i p3 (dbm) op1db (dbm) +5v current (ma) gain (db) nf (db) o i p3 (dbm) ii p3 (dbm) op1db (dbm) i p1db (dbm) mixer w/ lo amplifer -8.0 8.5 15.0 7.0 57.0 -8.0 8.5 15.0 23.0 7.0 16.0 i f amplifer 18.0 1.0 37.5 21.0 93.0 10.0 9.4 31.7 21.7 19.5 10.5 HMC665LP4 e cumulative mcm performance 150.0 10.0 9.4 31.7 21.7 19.5 10.5 * r f image rejection flter is not included in the released eval boards. typical performance cascade analysis HMC665LP4e upconverter mode (rf output = 700 to 1200 mhz, if input = 250 to 450 mhz, lo = low side or high side) component level cumulative mcm performance description gain (db) nf (db) o i p3 (dbm) op1db (dbm) +5v current (ma) gain (db) nf (db) o i p3 (dbm) ii p3 (dbm) op1db (dbm) i p1db (dbm) i f amplifer 18.0 1.0 38 21.0 93.0 18.0 1.0 38 20 21.0 4.0 mixer w/ lo amplifer -7.5 8.5 21 7.0 57.0 10.0 1.3 20.5 10 7.0 -3.0 HMC665LP4 e cumulative mcm performance 150.0 10.0 1.3 20.5 10 7.0 -3.0 * i f image rejection flter is not included in the released eval boards.
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - h i gh i p3 - s mt 10 10 - 6 part number package body material lead finish m s l r ating package marking [3] HMC665LP4 low s tress i njection molded plastic s n/pb s older m s l1 [1] h665 xxxx HMC665LP4 e r oh s -compliant low s tress i njection molded plastic 100% matte s n m s l1 [2] h665 xxxx [1] max peak refow temperature of 235 c [2] max peak refow temperature of 260 c [3] 4-digit lot number xxxx package information pin descriptions pin number function description i nterface s chematic 1, 2, 4, 5, 6, 8, 11, 14, 15, 19, 20, 22 - 24 n/c no connection. these pins may be connected to r f ground. performance will not be affected. 3 r f this pin is dc coupled and matched to 50 ohms. 7 i f i n this pin is matched to 50 ohms with a 56nh inductor to ground. s ee application circuit. 9 cap ac ground. an external capacitor of 0.01 f to ground is required for low frequency bypassing. s ee application circuit for further details. 10 m ixi f this pin is dc coupled. for applications not requiring operation to dc, this port should be dc blocked externally using a series capacitor whose value has been chosen to pass the necessary i f frequency range. for operation to dc, this pin must not source/sink more than 18 ma of current or part non-function and possible part failure will result. 12 i fout this pin is ac coupled and matched to 50 ohms. 13 vdd i f power supply for i f amplifer. choke inductor and bypass capacitor are required. s ee application circuit. 16 m ix lo this pin is dc coupled and matched to 50 ohms. an off chip dc blocking capacitor is required. 17 gnd backside of package has exposed metal ground paddle that must also be connected to ground. 18 vcclo power supply and r f output of the lo amplifer. three external bypass capacitors are recommended for optimum performance, as illustrated in the application circuit. HMC665LP4 / 665lp4e v00.0508 gaas mmic mixer w/ integrated if & lo amplifier, 0.7 - 1.2 ghz
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - h i gh i p3 - s mt 10 10 - 7 pin descriptions (continued) pin number function description i nterface s chematic 21 lo this pin is dc coupled and matched to 50 ohms. an off chip dc blocking capacitor is required. s ee application circuit. evaluation pcb - upconverter mode the circuit board used in the application should use r f circuit design techniques. s ignal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hit - tite upon request. i tem description j1 - j3 pcb mount s ma r f connector j4 2mm dc header c1, c2, c3 100 pf chip capacitor, 0402 pkg. c4, c6 1000 p f chip capacitor, 0603 pkg. c5, c7 2.2 f capacitor, tantalum c8 0.01 f chip capacitor, 0402 pkg. l1, l2 56 nh chip i nductor, 0402 pkg. l3 36 nh chip i nductor, 0603 pkg. r 1, r 3, r 4 0 ohm r esistor, 0402 pkg. r 5 24 ohm r esistor, 1210 pkg. u1 HMC665LP4( e ) - mixer pcb [2] 119242 e valuation board [1] r eference this number when ordering complete evaluation pcb [2] circuit board material: arlon 25f r list of materials for evaluation pcb 122009 [1] HMC665LP4 / 665lp4e v00.0508 gaas mmic mixer w/ integrated if & lo amplifier, 0.7 - 1.2 ghz
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - h i gh i p3 - s mt 10 10 - 8 HMC665LP4 / 665lp4e v00.0508 gaas mmic mixer w/ integrated if & lo amplifier, 0.7 - 1.2 ghz evaluation pcb - downconverter mode the circuit board used in the application should use r f circuit design techniques. s ignal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hit - tite upon request. i tem description j1 - j3 pcb mount s ma r f connector j4 2mm dc header c1, c2, c3 100 pf chip capacitor, 0402 pkg. c4, c6 1000 p f chip capacitor, 0603 pkg. c5, c7 2.2 f capacitor, tantalum c8 0.01 f chip capacitor, 0402 pkg. l1, l2 56 nh chip i nductor, 0402 pkg. l3 36 nh chip i nductor, 0603 pkg. r 2, r 3, r 4 0 ohm r esistor, 0402 pkg. r 5 24 ohm r esistor, 1210 pkg. u1 HMC665LP4( e ) - mixer pcb [2] 119242 e valuation board [1] r eference this number when ordering complete evaluation pcb [2] circuit board material: arlon 25f r list of materials for evaluation pcb 122010 [1]
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - h i gh i p3 - s mt 10 10 - 9 HMC665LP4 / 665lp4e v00.0508 gaas mmic mixer w/ integrated if & lo amplifier, 0.7 - 1.2 ghz application circuit - upconverter mode
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - h i gh i p3 - s mt 10 10 - 10 HMC665LP4 / 665lp4e v00.0508 gaas mmic mixer w/ integrated if & lo amplifier, 0.7 - 1.2 ghz application circuit - downconverter mode
|
